×
Menu

Basics and Profile Management

 
A profile is a data structured arrangement which describes a specific set of remaps and sensitivity adjustments. The MAX Mapper plugin supports the creation and maintenance of an unlimited number of profiles. The profiles can be shared, or backed up, through the Export/Import operations.
 
While the MAX Mapper plugin is running, all changes made in the profile configuration area take effect instantly. This allows you to check and test all remaps and sensitivity adjustments on-the-fly before you actually store the profile in a CronusMAX PLUS memory slot. To perform the tests keep a controller connected into your CronusMAX PLUS, the output (remapping results) can be checked during game play or in the Device Monitor.
 
Basics and Profile Management
1
Profile Menu
1. Profile Menu
 The Profile menu contains two commands as follows:
 
• New Profile: Create a brand new profile, with default remmaping settings. A dialog box will popup to enter the profile name.
 
• Import Profile: Import a MAX Mapper profile file, the imported profile may need to be renamed if the original name is being used by another profile. The export combined with import operation can be used to clone a profile, this may help with the creation of a new profile, since the basic configuration is already done.
2
Active Remap
2. Active Remap
This combo box lists all profiles you created in the MAX Mapper plugin and it is used to select a profile you want to configure. The active profile is also used to generate GPC scripts, export, rename and delete operations
3
Profile Operations
3. Profile Operations
 This is a set of tools and operations for configuration of the active MAX Mapper profile, as described below:
 
• Generate GPC Script: This operation generates a GPC script based on the active profile. The GPC script is exported into Cronus PRO's source code editor, where it can be edited and saved as a regular GPC script file.
 
• Export Profile: Profile exporting enables you to share profiles with your friends and have a backup copy. The export combined with import operation can be used to clone a profile, this may help with the creation of a new profile, since the basic configuration is already done.
 
• Rename Profile: Shows a dialog box to rename the active profile.
 
• Delete Profile: Delete the current active profile. A warning message will show to confirm the deletion. This operation cannot be reversed once it has been done.
4
Device Monitor
4. Device Monitor
Interacts with the Cronus PRO software to open the Device Monitor window, a subsequent click on this button will close the Device Monitor. The Device Monitor is a useful tool for check and test your MAX Mapper profiles. To perform these tests keep a controller connected into your CronusMAX PLUS.
5
Help
5. Help
With the help button you can access the offline version of MAX Mapper documentation.
6
Profile Configuration Area
6. Profile Configuration Area
The profile configuration area is where you will configure your profile. Any configuration should start with selections of the input and output protocols. The input represents the controller you pretend to use with this particular profile setting and the output represents the console.
 
NOTE
The controller shown in the center is actually representing the Output Protocol (console). The input entries (controller) are available in the combo boxes around the controller picture.

 
Check out the Profile Configuration topic for more detailed information.